please help how to use hold? by yamahafunkplayer to /forum/atc-sim

ce2121 1 point

DAL1234 H FENJE FlightID "H" Fix

2.0 by will9372 to /forum/atc-sim

ce2121 0 points

Weird! It is a bummer that it broke; I got mine to work by tinkering with it for awhile, but I'm lucky enough to have JS experience.

2.0 by will9372 to /forum/atc-sim

ce2121 1 point

Hey redbaron, I posted a temporary fix awhile ago to the GM script:

Change line 397 from:

if((unsafeWindow.G_objPlanes[ID][7] == 0) && (fnMyDistance(ID, unsafeWindow.G_objPlanes[ID][12]) < 15))

To:

if((unsafeWindow.G_objPlanes[ID][7] == 0) && unsafeWindow.G_objPlanes[ID][11] === null)

It was broken because now, when a plane crosses a fix, the 'cleared to' fix is set to NULL. Jay's code does this more than 15 units of distance away from a fix, so the Helper script never gets a chance to catch it and send the plane on it's way to the next fix in the route. This code change looks for planes that have a route and have recently passed a fix and have had their 'cleared to' fix set to NULL. :)

1

KDFW Traffic Update (ATC-SIM)

submitted by ce2121 to /forum/atc-sim

1

KORD Traffic Update (ATC-SIM)

submitted by ce2121 to /forum/atc-sim

KATL Traffic Update by ce2121 to /forum/atc-sim

ce2121 0 points

It should work with Tampermonkey, but I haven't tested it.

4

KATL Traffic Update (ATC-SIM)

submitted by ce2121 to /forum/atc-sim

Update on chain command? by av8nut to /forum/atc-sim

ce2121 0 points

Here's a temporary fix!

In the helper script, change line 397 from:

if((unsafeWindow.G_objPlanes[ID][7] == 0) && (fnMyDistance(ID, unsafeWindow.G_objPlanes[ID][12]) < 15))

To:

if((unsafeWindow.G_objPlanes[ID][7] == 0) && unsafeWindow.G_objPlanes[ID][11] === null)

It was broken because now, when a plane crosses a fix, the 'cleared to' fix is set to NULL. Jay's code does this more than 15 units of distance away from a fix, so the Helper script never gets a chance to catch it and send the plane on it's way to the next fix in the route. This code change looks for planes that have a route and have recently passed a fix and have had their 'cleared to' fix set to NULL. :)

ATC-SIM Helper script and chain commands gone? by Evan to /forum/atc-sim

ce2121 1 point

Here's a temporary fix!

In the helper script, change line 397 from: if((unsafeWindow.G_objPlanes[ID][7] == 0) && (fnMyDistance(ID, unsafeWindow.G_objPlanes[ID][12]) < 15)) To: if((unsafeWindow.G_objPlanes[ID][7] == 0) && unsafeWindow.G_objPlanes[ID][11] === null)

It was broken because now, when a plane crosses a fix, the 'cleared to' fix is set to NULL. Jay's code does this more than 15 units of distance away from a fix, so the Helper script never gets a chance to catch it and send the plane on it's way to the next fix in the route. This code change looks for planes that have a route and have recently passed a fix and have had their 'cleared to' fix set to NULL. :)

ATC-SIM Helper script and chain commands gone? by Evan to /forum/atc-sim

ce2121 0 points

test?

1

KATL Time Lapse 100 Arrivals / Departures (ATC-SIM)

submitted by ce2121 to /forum/atc-sim