Ideas for 2.0 by leopard to /forum/atc-sim

Fox 2 points

Hi,

I put my suggestion also below this idea:

I can't find the thread with chain commands again. Is it possible to make a command with more than one waypoint? E.g. Amsterdam LH432 C 5 C LLS C 4 C LUNIX C 3 C ROVEN C RR C 2 ? Also w/out the flightlevel change would be a more realistic experience.

BR,

Fox

"Scale" command causes return to main menu by verbojuice to /forum/atc-sim

Fox 0 points

Hi Jay,

I got the same problem. But the solution is to wait until every waypoint and traffic is loaded. If you type "scale" into the command box while it's loading it causes the system to go back to the main page. FF

Idea for multiple clearances/commands by anitelite to /forum/atc-sim

Fox 1 point

Hi, I take the opportunity to copy and paste my previous idea also in here. I think our thoughts are basicly the same. So here is my text:

Hello, I want to introduce also new ideas. Also in real life atc the controler gives an a/c the clearance to a point, let's say VOR DPK at New York. But due to high traffic I want to let the pilots fly first via "Zachs". Now my idea/question:

Is it possible to create a command that makes it possible to let a a/c navigate to several points, add the speed and t/o clearance? For example:

FlightID C "DPK" via (v) "Zachs" "Shipp" C 15 S 250 T

and for in-flight command:

FlightID C 3 X S 180 C "Rosly"

Thus I don't have to click 3 times on the same flight ID. It saves time and is also more realistic in my opinion.

Thank you for reading.

Idea for new command by atcfreak112 to /forum/atc-sim

Fox 1 point

Hello, I want to introduce also new ideas. Also in real life atc the controler gives an a/c the clearance to a point, let's say VOR DPK at New York. But due to high traffic I want to let the pilots fly first via "Zachs". Now my idea/question:

Is it possible to create a command that makes it possible to let a a/c navigate to several points, add the speed and t/o clearance? For example:

FlightID C "DPK" via (v) "Zachs" "Shipp" C 15 S 250 T

and for in-flight command:

FlightID C 3 X S 180 C "Rosly"

Thus I don't have to click 3 times on the same flight ID. It saves time and is also more realistic in my opinion.

Thank you for reading.